Ivation BRI20EA5-1 Digital Safe Box Manuel d'utilisateur télécharger pdf

Instructions for Use of Electronic Safe

Notice: For the rst opening, please take off the cover (on

the middle of keypad), then take out the tubular emergency

key from the plastic bag, insert the key into the lock hole, turn

the key, then turn the knob to open the door. After that, put 4

batteries of 1.5V in the battery box (on the back of the door),

then leave the door open and take the keys out.

I. Change the personal code

Press the red reset button( on the left-side of back of door), the

yellow light will be on, then input any 3-8 digits you want, press “A”

or “B” to conrm, followed by two beeps, indicating that the new

code have been accepted and stored.

If the yellow ash with the buzzer beeps three times means the new

code is invalid and should operate again.

II. Open the safe

Input the personal code, followed by one beep and yellow light

ashing, then press ”A” or “B” to conrm, the green light will be on,

rotate the knob and pull out, the door is opened. If the code you

input is incorrect, there will be 5 beeps sound. If 3 incorrect codes

input continuously, the keypad will be blocked for 20s.

III. Lock the safe

Close the door, then turn the knob anti-clockwise, the control system

works and the safe will be locked..

IV. Emergency status

(1) If you forgot the code, use the emergency key to open the safe

as the rst opening, and then press the red button(on the left-

side of back of door) to reset the code.

(2) If both the red light and green light are on, indicating that you

should change the batteries. Please have a test before you

close the door.

Please keep the emergency keys out of the safe.

™

IVATION / 2 Bergen Tpke. / Ridgeeld Park, NJ, 07660 / WWW.IVATIONUSA.COM

Instructions for Use of Electronic SafeNotice: For the rst opening, please take off the cover (on the middle of keypad), then take ou

Pas de commentaire

Ivation BRI20EA5-1 Digital Safe Box Manuel d'utilisateur